STEAM Bent Oak Rocker Runners, 1-3/4″ Wide

2 (ONE PAIR) – STEAM BENT RED OAK ROCKER RUNNERS Overall: 1-1/4″ High (Tall) — by — 1-3/4″ Wide — by — 34-1/4″ Long (Length measurement taken straight across from tip to tip.) 36″ Radius/Arc Bend — from the ends to the floor rise distance Slightly Sanded, Unfinished and Not Drilled. You drill it to your exact specifications. These are raw, oak wood that is not treated. Make sure you treat and prime these before painting or use a good sealant, otherwise the humidity and weather could swell them up and ruin them. Sold in PAIRS ONLY PLEASE NOTE: Length Measurements of ALL Rocker Runners are approximate as they vary from shipment to shipment. W3-5240

Steam-bent Rocker Runners are perfect for antique rocker restoration or new rocking chair construction. This is the widest runner we sell. Steam bending produces a much stronger and more durable runner than those cut out of a piece of wood. Made from solid oak, sanded and unfinished. Length is measured straight across from tip to tip at the longest point. The radius is measured along the bottom of the runner from end to end. Measurements will vary slightly from batch to batch. 1 1/4’’ H x 1 13/16’’ W x 34 5/16’’ L Radius: 36″ Sold as a pair. Enough for one Chair Previously sold by WSI as W3-5240 Red Oak Package contains one pair of runners. Items typically ship same or next day.

Steam bending produces a much stronger rocker runner than those cut from flat stock. Made of unfinished solid red oak. Slightly Sanded, Unfinished and Not Drilled. You drill it to your exact specifications. These are raw, oak wood that is not treated. (Make sure you treat and prime these before painting or use a good sealant, otherwise the humidity and weather could swell them up and ruin them.) The radius is measured along the bottom of the runner following the curve from end to end. The length is measured across the runner from tip to tip at the longest point. Measurements will vary slightly from batch to batch.